Rotation Source - KEB COMBIVERT F5 MULTI Applications Manual

Setpoint- and Ramp Adjustment
6.4.3

Rotation Source

oP.1
0-limited or absolute
Digital rotation adjustment (oP.2)
© KEB Antriebstechnik, 2002
All Rights reserved
The selection of rotation direction determines the manner in which the rotation direction
is adjusted. One can choose between following possibilities:
Fig. 6.4.3 Rotation selection with oP.1
Digital
Terminal strip
oP.2
forward/reverse
0-lim. abs. 0-lim.
Concerning the adjustment of direction of rotation it is differentiated between two
evaluations:
0-limited - negative setpoints are set to zero, i.e. only positive setpoints are driven
in accordance with the selected rotation direction
absolute - no sign of the setpoint is evaluated and it is always driven with the amount
in accordance with the selected rotation direction
6.4.3.a Absolute and 0-limited
0-limited
Setpoint
oP.2 Display Setpoint rotation
0 LS Standstill (Low Speed)
1 F Forward (Forward)
2 r Reverse (Reverse)
Name: Basis
KEB COMBIVERT F5-M / S
Functional Desription
Terminal strip
Run/Stop
dependent
abs. 0-lim. abs. LS
4 5
3
6
2
7
Rotation
1 8
selection
0
9
oP. 1
Setpoint limits
absolute
Setpoint
adjustment
Date
12.05.04
Control word
Setpoint-
SY.50
no LS 0-lim. abs.
Setpoint
Setpoint
adjustment
Chapter Section Page
6 4 7
6