Encoder Interface
6.10 Encoder Interface
(not for B-housing)
6.10.1 Designs
6.10.1 Encoder interfaces
X3A
X3B
©
KEB Antriebstechnik, 2002
All rights reserved
The KEB COMBIVERT F5 supports two from each other separated encoder channels.
Each encoder channel can support following interface dependent on the available
hardware:
Encoder channel 1 (X3A)
ï is a 15-pole incremental encoder input for rectangular signals
Encoder channel 2 (X3B) can support following interfaces
ï 9-pole incremental encoder input for rectangular singal
ï Incremental encoder output
ï Incremental encoder In-/Output
Further Interfaces (describes in separate manuals)
ï Synchronous serial interface (SSI)
ï Tachometer input
ï Initiator input
ï Hiperface
ï Endat
ï SinCos
X3A
X3B
Name: Basis
KEB COMBIVERT F5
Functional Description
Date
17.02.03
Chapter
Section
Page
10
3
6
6