Pid Actual Value - KEB COMBIVERT F5 MULTI Applications Manual

Functional Description

6.12.3 PID Actual Value

Pic. 6.12.3 PID controller actual value
Analog input An1 (ru.28)
Analog input An2 (ru.30)
Analog input An3 (ru.32)
PID absolute actual value (cn.3)
Active current (ru.17)
PID actual value source (cn.2)
Chapter Section Page
6 12 6
This section describes the PID-controller actual value. The actual value input is adjusted
with the PID-reference source (cn.2).
cn.2 PID actual value source
Aux input (ru.53)
Utilization (ru.13)
DC-voltage (ru.18)
The actual value source (cn.2) determines from where the PID-Controller receives the
actual value signal. Following signals are available:
cn.2 Signal
0 AN1
1 AN2
2 AN3
3 Aux
4 cn.3
5 Active current
6 Utilization
7 DC-voltage
Date Name: Basis
04.05.04 KEB COMBIVERT F5
0
1
2
3
4
5
6
7
Function
Signal of the analog input 1 (see chapter 6.2)
Signal of the analog input 2 (see chapter 6.2)
- reserved at B control -
Signal of the analog input 3 (see chapter 6.2)
- reserved at B control -
Signal of the Aux input (see chapter 6.2)
PID absolute actual value is preset with cn.3 in the
range of -400,0...400,0 %
The active current -200...200 % displayed in parameter
ru.17 is used as actual value signal (100 % = I
The utilization 0...255 % displayed in parameter ru.13
is used as actual value signal (100 % = 100 %)
The DC-voltage 0...1000 V displayed in parameter
ru.18 is used as actual value signal (100 % = 1000 V)
Technology Control
PID controller
rated
© KEB Antriebstechnik, 2002
All rights reserved
)