KEB COMBIVERT F5 MULTI Applications Manual page 208

Functional Description
Pn.20 Stall level
Pn.21 Stall Acc/Dec time
Fig. 6.7.2 Functioning of Stall-function with standard setting
Actual frequency (ru.3)
Inverter status (ru.0)
Actual utilization (ru.13)
Used Parameters
R/W PROG.
Param. Adr.
Pn.19 0413h
Pn.20 0414h
Pn.21 0415h
Chapter Section Page
6 7 6
The max. constant current represents the setpoint for the control. The adjusted value
refers to the inverter rated current (In.1).
Setting range:
Depending on the setting of Pn.19 (bit 3) the ramp time or the time constant of the
differential controller is adjusted here. The adjusted ramp times refer to 100 Hz /
1000 min -1 (depending on ud.2).
Setting range:
ENTER
max
min
0 255
- 0 % 199 % (200 = oFF)
- 0.00 s 300.00 s
Date Name: Basis
04.05.04 KEB COMBIVERT F5
0...199 %; 200 = off (default)
0...300.00 s (2.00 s default)
Step
default
1 0
1 % oFF
0.01s 2.00 s
Protective Functions
adjusted constant
current limit
bit-coded
% referring to inverter rated current
-
© KEB Antriebstechnik, 2002
All rights reserved