F5-Basic Control; B-Housing - KEB COMBIVERT F5 MULTI Applications Manual

Parameter
5.1.2 F5-BASIC
Control
5.1.3 F5-GENERAL
Control

B-housing

Chapter Section Page
5 1 4
This control card is used for all housing sizes. Following parameters are not available
with the control F5-BASIC, so they do not need to be considered in the parameter
description:
ru 4 encoder 1 frequency
ru 5 encoder 2 frequency
ru 6 calculated act. freq.
ru 7 actual value display
ru 9 encoder 1 speed
ru 10 encoder 2 speed
ru 29 AN2 pre amplifier disp.
ru 30 AN2 post amplifier disp.
ru 31 AN3 pre amplifier disp.
ru 32 AN3 post amplifier disp.
ru 35 ANOUT2 pre ampl. disp.
ru 36 ANOUT2 post ampl. disp.
an 10 AN2 interface selection
an 11 AN2 noise filter
an 12 AN2 save mode
an 13 AN2 save trig. inp. sel.
an 14 AN2 zero clamp
an 15 AN2 gain
an 16 AN2 offset X
an 17 AN2 offset Y
an 18 AN2 lower limit
an 19 AN2 upper limit
an 20 AN3 interface selection
an 21 AN3 noise filter
an 22 AN3 save mode
an 23 AN3 save trig. inp. sel.
an 24 AN3 zero clamp
an 25 AN3 gain
an 26 AN3 offset X
an 27 AN3 offset Y
an 28 AN3 lower limit
This control card is used for housing size B. The parameters In.8 and In.9 are only
available at this control card.The following parameters are not available, so they do
not need to be considered in the parameter description:
ru 4 encoder 1 frequency
ru 5 encoder 2 frequency
ru 6 calculated act. freq.
ru 7 actual value display
ru 9 encoder 1 speed
ru 10 encoder 2 speed
ru 31 AN3 pre amplifier disp.
ru 32 AN3 post amplifier disp.
op 44 ext. funct. mode/src
op 45 ext. funct. dig. source
op 46 ext. funct. acc/dec time
op 47 sweep-gen. acc. time
op 48 sweep-gen. dec. time
op 49 diam. corr. dmin/dmax
op 51 motorpoti destination
an 20 AN3 interface selection
an 21 AN3 noise filter
an 22 AN3 save mode
an 23 AN3 save trig. inp. sel.
an 24 AN3 zero clamp
an 25 AN3 gain
an 26 AN3 offset X
an 27 AN3 offset Y
an 28 AN3 lower limit
an 29 AN3 upper limit
in 5 interface type
in 17 temp.- mode
cs 1 act. source
dr 3 DASM rated power
ec 0 encoder 1 interface
ec 1 encoder 1 (inc/r)
Date Name: Basis
18.05.04
KEB COMBIVERT F5-M / S
an 29 AN3 upper limit
an 36 ANOUT2 function
an 37 ANOUT2 value
an 38 ANOUT2 gain
an 39 ANOUT2 offset X
an 40 ANOUT2 offset Y
di 0 PNP / NPN selection
do 25 inv. flags for O1
do 26 inv. flags for O2
do 33 flag select. for O1
do 34 flag select. forO2
in 8 software version p. unit
in 9 software date p. unit
ec 3 time 1 for speed calc.
ec 4 gear 1 numerator
ec 5 gear 1 determinator
ec 6 enc.1 rotation
ec 7 enc.1 trigger
ec10 encoder 2 interface
ec11 encoder 2 (inc/r)
ec13 time 2 for speed calc.
ec14 gear 2 numerator
ec15 gear 2 determinator
ec16 enc.2 rotation
ec17 enc.2 trigger
ec20 enc.2 operating mode
ec21 SSI multiturn res.
ec22 SSI clock frq. sel.
ec23 SSI data code
ec25 nominal tacho speed
ec27 operation mode output
aa14 evaluation para 1
aa15 evaluation para 2
aa16 evaluation para 3
aa17 evaluation para 4
aa18 evaluation para 5
aa19 evaluation para 6
aa20 evaluation para 7
aa21 evaluation para 8
aa22 evaluation para 9
aa23 evaluation para 10
aa24 evaluation para 11
aa25 evaluation para 12
© KEB Antriebstechnik, 2002
All Rights reserved