Network Components; Available Hardware; Rs232-Cable Pc /Operator 00.58.025-001D; Hsp5-Cable Pc / Control Board 00.F5.0C0-0001 - KEB COMBIVERT F5 MULTI Applications Manual

Networks
11. Networks
11.1 Network
Components

11.1.1 Available Hardware

11.1.2 RS232-Cable PC /
Operator
00.58.025-001D
11.1.3 HSP5-Cable PC /
Control Board
00.F5.0C0-0001
© KEB Antriebstechnik, 2002
All rights reserved
The KEB COMBIVERT F5 can be easily integrated into different networks. For that
purpose the inverter is fitted with an operator that is appropriate for the respective
bus system. Following hardware components are available:
– RS232-Cable PC/Operator
for operation with interface operator
– HSP5-Adaptor PC/Control board
for operation without operator; RS232 => TTL
– F5 Interface-Operator
serial networks in RS232 or RS485-standard
– F5 Profibus-DP-Operator
– F5 InterBus-Operator
– InterBus-Remote bus interface connection Part-No.:
(in connection with Interface-Operator)
– F5 CanOpen-Operator
– F5 Sercos-Operator
The cable of 3m length is used for the direct RS232-connection between PC (9-pole
SUB-D-connector) and operator.
9-pole SUB-D coupling
Housing (PE)
The RS232-cable is suitable exclusively for the communication between PC
and Operator. If the cable is plugged in directly onto the control board, it can
lead to the desctruction of the interface of the PC.
The HSP5-cable is used for the direct connection between PC and control board.
The necessary conversion to TTL-level occurs in the cable.
9-pole SUB-D coupling
PC
Name: Basis
KEB COMBIVERT F5
Network Hardware
Part No.:
Part No.:
Part No.:
Part No.:
Part No.:
Part No.:
Part No.:
2
3
5
PC
Date
04.05.04
00.58.025-001D
00.F5.0C0-0001
00.F5.060-2000
00.F5.060-3000
00.F5.060-4000
00.B0.0BK-K001
00.F5.060-5000
00.F5.060-6000
9-pole SUB-D connector
2
3
7
F5-Operator
9-pole SUB-D connector
F5-Control board
Chapter Section Page
11 1 3
11