Special Functions - KEB COMBIVERT F5 MULTI Applications Manual

Functional Description
6.7.10 Special
Functions
(not at F5-B)
Special Functions (Pn.65)
Chapter Section Page
6 7 20
Here functions are summarised which affect the behaviour of the inverter in certain
operating cases.
Bit Value Meaning
0 Switching behaviour GTR7 (see Chapter 6.7.9 „GTR-control")
0 GTR7 does not switch in the status „LS" (default)
1 GTR7 switches dependent on the level also at „LS"
1 This bit determines the error-/warning message, that is triggered at the
switching of an external error input (Pn.4).
0 Pn.4 is selection for external error-/warning message. The response to
this message (A.EF/E.EF) is defined with Pn.3.
1 Pn.4 is selection for error undervoltage (E.UP). Pn.3 has no function in
this case.
2 Status, if the power circuit is not ready (no_PU). This setting applies to
the output switching conditions do.0...7 = 4...6 and the ERROR-bit in
the status word (sy.44/sy.51 Bit 1).
0 State „no_PU" is an Error
1 State „no_PU" is an Error
3 Wie bei LS kann der GTR7 auch bei Fehler aktiviert levelabhängig wer-
den.
sorgtem Leistungsteil (no_PU) wird der GTR7 abgeschaltet.
0 GTR7 nicht aktiv bei Fehler
1 GTR7 levelabhängig bei Fehler
Date Name: Basis
04.05.04 KEB COMBIVERT F5
Ausnahme: Bei Öffnen der Reglerfreigabe und bei nicht ver-
Protective Functions
© KEB Antriebstechnik, 2002
All rights reserved