Summary Of In-Parameter; Summary Of Sy-Parameter - KEB COMBIVERT F5 MULTI Applications Manual

Functional Desription
6.1.2 Summary of In-
Parameter
6.1.3 Summary of Sy-
Parameter
Chapter Section Page
6 1 4
The In- (Information) parameter group includes data and information about the
identification of the hardware and software as well as to the type and number of errors
that occurred. Following parameters are available:
in. 0 inverter type
in. 1 rated inverter current
in. 3 max. carrier frequency
in. 4 rated carrier frequency
in. 6 software version
in. 7 software date
in. 10 serial no. (date)
in. 11 serial no. (count)
in. 12 serial no. (AB-no. high)
in. 13 serial no. (AB-no. low)
in. 14 customer no. high
in. 15 customer no. low
in. 16 QS no.
in. 17 temp.- mode
in. 22 user parameter 1
in. 23 user parameter 2
in. 24 last error
in. 25 error diagnosis
in. 26 E.OC error counter
in. 27 E.OL error counter
in. 28 E.OP error counter
in. 29 E.OH error counter
in. 30 E.OHI error counter
in. 31 KEB-Hiperface
in. 32 Interface software date
As the name already says the Sy- (system) parameter group contains system-specific
parameters. Following parameters are available:
Sy. 2 inverter identifier
Sy. 3 power unit code
Sy. 6 inverter address
Sy. 7 baud rate ext. bus
Sy. 8 Bus synchron time
Sy. 9 HSP5 watchdog time
Sy. 11 baud rate int. bus
Sy. 32 scope timer
Sy. 41 control word high
Sy. 42 status word high
Sy. 43 control word long
Sy. 44 status word long
Sy. 50 control word low
Sy. 51 status word low
Sy. 52 set speed value
Sy. 53 actual speed value
Sy. 56 start display address
Date Name: Basis
KEB COMBIVERT F5-M / S
12.05.04
Operating and Unit Data
© KEB Antriebstechnik, 2002
All Rights reserved