Parameter Description - KEB COMBIVERT F5 Reference Manual

6.Parameter Description

The programming menu is where all manual parameter adjustments are
made and can be accessed at Home > Prog (F3).
The Parameter menu contains the following groups:
Operator System:
These parameters provide general information about the operator
and drive hardware and software. Additionally, the operator password
level is set here, which allows for different access levels.
Configuration Handling:
These settings allow a user to save parameters and default to OEM
settings.
Basic Setup:
These parameters provide the very basic information needed to
configure the drive, including: motor type, control type, and contract
speed.
Inputs:
These parameters define the logic of the inputs and assign control
functionality to the digital inputs.
Motor Data:
These parameters define and display all relevant motor values and
motor protection settings.
Encoder Data:
These parameters define the settings and scalings of the drive
encoders
Machine Data:
These parameters define the machine data, including: sheave
diameter, roping ratio, and rated load values.
Speed Profile:
These parameters adjust the speed, acceleration, and jerk values
across the elevator run profile.
Tune Parameters:
These parameters contain automatic tuning parameters.
Here you can learn the system inertia, motor data, and motor pole
positions.
Parameters Descriptions
OS00...OS25
CH01...CH15
US02...US06
LI01...LI60
LM01...LM33
LE01...LE36
LN01...LN05
LS00...LS55
LL01...LL18
109