KEB COMBIVERT F5 MULTI Applications Manual page 118

Functional Desription
Set speed value
Sy. 52
Adr.
0034h
Presetting of the setpoint speed in the range of ±16000 rpm. The source of direction of rotation is determined as with the
other absolute setpoint sources over oP.1. The setpoint source oP.0 must be adjusted to Ñ5ì for setpoint setting by Sy.52.
Actual speed value
Sy. 53
Adr.
0035h
With this parameter the current actual speed can be readout in rpm. The direction of rotation is signaled by the sign.
Start display address
Sy. 56
Adr.
0038h
Sy.56 adjusts the parameter address which shall be represented on switching on the operator. Only valid addresses are
accepted.
If this parameters is available in the CP-Mode, the setting becomes effective there. Otherwise CP.0 is indicated as start
parameter.
Chapter Section Page
6 1 28
min max
-32000 32000
min max
-32000 32000
min max
0 7FFFh
Date Name: Basis
KEB COMBIVERT F5-M / S
12.05.04
Operating and Unit Data
default
rpm
1 0
default
rpm
1 0
default
hex
1 0203
© KEB Antriebstechnik, 2002
All Rights reserved