KEB COMBIVERT F5 MULTI Applications Manual page 106

Functional Desription
ru.44 Timer 2 display
Adr.
022Ch
The count of the free-programmable timer 2 is indicated. The display shows optionally seconds, hours or edges/100
(see LE.26). The counter can be adjusted to any chosen value by keyboard or bus. The programming of the counter is
done with the parameters LE.22...LE.26 (also see Chapt. 6.9.4 ÑTimerì).
ru.45 Act. carrier frequency
Adr.
022Dh
Shows the actual carrier frequency of the inverter. The displayed value corresponds to following switching frequencies:
0 = 2 kHz
1 = 4 kHz
2 = 8 kHz
ru.46 Motor temperature
Adr.
022Eh
Indicates the current motor temperature. Precondition for this function is aspecial power circuit. The temperature detection
is connected to the terminals T1/T2.
0: T1/T2 closed
255: T1/T2 open
ru.47 Actual torque limit mot.
Adr.
022Fh
This parameter displays the currently adjusted set torque limit for motoric operation.
ru.48 Actual torque limit gen.
Adr.
0230h
This parameter displays the currently adjusted set torque limit for generatoric operation.
Chapter Section Page
6 1 16
min max
0 655,35
min max
0 4
3 = 12 kHz
4 = 16 kHz
min max
0 255: off
253, 254:
min max
-10000 10000
min max
10000
-10000
Date Name: Basis
KEB COMBIVERT F5-M / S
12.05.04
0,01
1
1
broken cable; short circuit; detection error
0,01
0,01
Operating and Unit Data
default
- -
default
-
-
default
∞ C
-
default
Nm -
default
Nm
-
© KEB Antriebstechnik, 2002
All Rights reserved