KEB COMBIVERT F5 MULTI Applications Manual page 149

Digital In- and Outputs
71 Drive runs synchronously; is set, if after the activation of the synchronous run the drive is synchronized (F5-M/
S).
72 Actual position index = Level (Posi modul at F5-M/S)
73 Absolute active power > Level
74 Active power > Level
75 Absolute (actuel position – scan position) > Level (Posi modul at F5-M/S)
Level 0...7
LE.0...LE.7
Hysteresis 0...7
LE. 8...LE.15
Frequency hysteresis LE.16
Response to warning signals
Pn.8, Pn.10, Pn.12, Pn.14,
© KEB Antriebstechnik, 2002
All rights reserved
These parameters defines the level of the switching conditions. Level 0 (LE.0) applies
for switching condition 0; LE.1 for switching condition 1 ... and so forth.
Setting range:
Step:
Default:
At pretending in increments one increment is 0,01.
The hysteresis, in reference to the adjusted values, defines the parameters
LE. 8...LE.15. Hysteresis 0 (LE.8) applies for comparison level 0; LE.9 for comparison
level 1 ... and so forth.
Default:
Frequency:
Voltage:
Analog values:
Current:
Temperature:
LE.16 defines the hysteresis for the status constant-run and tripping frequencies for
the DC-brake.
These parameters determine the behaviour of the inverter in case of warning signals.
To learn more about the adjustment possibilities as well as the performance of the
Pn.16
appropriate drive please refer to Chapter 6.7 „Protective functions".
Name: Basis
KEB COMBIVERT F5
Functional Description
-30000,00...30000,00
0,01
see parameter table
0,5 Hz
1 V
0,5 %
0,5 A
1 °C
Date
28.01.03
Chapter Section Page
15
6 3 15
6