KEB COMBIVERT F5 MULTI Applications Manual page 265

Special Functions
Exsample 2
© KEB Antriebstechnik, 2002
All rights reserved
The drive runs with different speed back and forth and always reverses at the same
points.
Downloadlist:
Set Parameter
0 Ud01 Password
0 Fr01 Copy parameter set
0-3 oP00 Reference source
0-3 oP01 Rotation source
0 oP02 Rotation setting
1 oP02 Rotation setting
2 oP02 Rotation setting
3 oP02 Rotation setting
0-3 oP10 Max. reference forward
0-3 oP11 Max. reference reverse
0-3 oP28 Acc. time forward
0-3 oP30 Dec. time forward
0 Pn63 Positioning delay
1 Pn63 Positioning delay
2 Pn63 Positioning delay
3 Pn63 Positioning delay
0 Fr02 Parameter set source
0 Fr05 Set activation delay
1 Fr05 Set activation delay
2 Fr05 Set activation delay
3 Fr05 Set activation delay
0 Fr06 Set deactivation delay
1 Fr06 Set deactivation delay
2 Fr06 Set deactivation delay
3 Fr06 Set deactivation delay
0 Fr07 Para. set input selection
0 Fr11 Reset set input selection
0 di11 I1 Function
0 di15 IA Function
0 do04 Condition 1
1 do04 Condition 1
2 do04 Condition 1
3 do04 Condition 1
Name: Basis
KEB COMBIVERT F5
Functional Description
Value Notes
440
-2: def. cust.para all sets
0: Analog REF
0: dig.(op.2), 0-lim.
1: forward Set 0: clockwise rotation
0: low speed Set 1: clockwise rotation positioning
2: reverse Set 2: counterclockwise rotation
0: low speed Set 3: counterclockwise positioning
70,0000 Hz The max. setpoint value must be the
same in all sets.
-1: = see oP.10 The max. setpoint value can be different
for the direction of rotation.
0,10 s
0,10 s
-1: off
0,8 s Shifting of the position at clockwise
rotation
-1: off
3,1 s Shifting the position at counterclockwise
rotation
2: terminal binary coded
0,00 s Additional break between counter-
clockwise and clockwise rotation
0,00 s This time must be = 0
0,00 s Additional break between clockwise and
counterclockwise rotation
0,00 s This time must be = 0
0,00 s This time must be = 0
1,00 s Break between clockwise and
counterclockwise rotation
0,00 s This time must be = 0
1,00 s Break between counterclockwise and
clockwise rotation
272: I1+IA
0: no input
2048: Set sel. Initiator signal
2048: Set sel. Changeover between clockwise and
counterclockwise rotation
0: off Initiator active: -> set 1
1: on Positioning completed: -> set 2
1: on Initiator active: -> set 3
0: off Positioning completed: -> set 0
Date
04.05.04
Chapter Section Page
6 9 33
6