Chapter 1: Getting Started With The Kintex-7 Fpga Kc705; Embedded Kit; Introduction; Kc705 Embedded Kit Contents - Xilinx KC705 Getting Started

Getting Started with the
Kintex-7 FPGA KC705 Embedded Kit

Introduction

The Kintex®-7 FPGA embedded kit conveniently delivers the key components of the
Xilinx® Embedded Targeted Design Platform (TDP) required for developing embedded
software and hardware in a wide range of applications in the broadcast, industrial,
medical, and aerospace and defense markets. For software developers, a familiar
Eclipse-based integrated development environment (IDE), GNU tools, operating systems,
libraries, and a pre-verified reference design enables them to start programming right
away. Similarly, hardware designers now have immediate access to a pre-integrated
MicroBlaze™ processor subsystem that includes the most commonly used peripheral IP
cores, enabling the designers to begin at once developing their custom logic.
This getting started guide identifies the steps required to set up the KC705 board and run
the out-of-box video demonstration, which illustrates the flexibility and capability of a
MicroBlaze processor subsystem for embedded design. If the Xilinx ISE® software has not
already been installed, the user is directed through the steps to install the software, get
updates, and generate a license.

KC705 Embedded Kit Contents

What's Inside the Box
•
•
•
•
•
KC705 Getting Started Guide
UG913 (v1.0.1) May 31, 2012
KC705 evaluation board featuring the XC7K325T-2FFG900C FPGA
USB cables, Ethernet cable, and universal power supply
SD card
ISE Design Suite: Embedded Edition (device-locked for the XC7K325T-2FFG900C
FPGA) which includes:
• ISE Foundation with ISE Simulator
• PlanAhead™ design tools
• Embedded Development Kit (EDK)
• Xilinx Platform Studio (XPS)
• Software Development Kit (SDK)
• ChipScope™ Pro logic analyzer
Documentation:
• UG913, Getting Started with the Kintex-7 FPGA KC705 Embedded Kit
www.xilinx.com
Chapter 1
5