Port 5; Table 8-19 Pins Of Port 5 - Fujitsu MB90420/5 (A) Series Hardware Manual

F2mc-16lx family 16-bit microcontrollers

Table of Contents

MB90420/5 (A) SERIES F

8.7 Port 5

Port 5 is a general-purpose I/O port that serves both as a resource input and output. Each pin can be

switched between the resource and the port by the bit. The function as a general-purpose I/O port is mainly

explained here. The configuration, pins, block diagram of the pins, and registers for port 5 are shown below.

n Configuration of port 5

Port 5 consists of the following three elements:

• General-purpose I/O pins, resource input pins (P50/INT0 to P57/SGA)

• Port 5 data register (PDR5)

• Port 5 direction register (DDR5)

n Pins of port 5

The I/O pins of the port 5 also serve as resource input pins, so when using a pin of port 5 as a resource I/O

pin, it cannot be used as a general-purpose I/O port. Table 8-19 shows the pins of port 5.

P52/INT2/TX1

For the circuit type, see Section 1.7.

MC-16LX FAMILY 16-BIT MICROCONTROLLERS HARDWARE MANUAL

Port Function

(hysteresis)