Delta VFD300C43S-HS User Manual page 636

Chapter 15 CANopen Overview C2000-HS
ID
Display
No.*
21
22
23
24
26
27
28
29
30
31
33
Fault code
Overload; the AC motor drive detects
excessive drive output current.
0015H
NOTE: The AC motor drive can withstand up
to 150% of the rated current for a maximum
of 60 seconds.
0016H Electronic thermal relay 1 protection
0017H Electronic thermal relay 2 protection
Motor overheating: the AC motor
0018H drive internal temperature exceeds
the setting for Pr.06-30 (PTC level).
When the output current exceeds the
001AH
over-torque detection level (Pr.06-07
or Pr.06-10) and exceeds Pr.06-08
or Pr.06-11; when Pr.06-06 or
Pr.06-09 is set as 2 or 4, the keypad
001BH
displays these two fault codes.
001CH Low current detection
001DH Home limit error
001EH Cannot program internal EEPROM
001FH Cannot read internal EEPROM
0021H U-phase current error
15-28
Description
CANopen
CANopen
fault register
fault code
(bit 0–7)
1 2310H
1 2310H
1 2310H
3 FF20H
3 8311H
3 8311H
1 8321H
1 7320H
5 5530H
5 5530H
1 FF04H