Chapter 12 Description of Parameter SettingsC2000-HS
Homing by Frequency 1
Settings
Homing by Frequency 2
Settings
Controlled by multi-function input terminal Pr. 02-01–02-08 (44–47).
44: Reverse direction homing (NL)
45: Forward direction homing (PL)
46: Homing (ORG)
47: Homing function enabled
If the drive is not controlled by CANopen or the PLC, when setting Pr. 00-10 = 1 (Control mode =
P2P position control), set the external input terminal to 47 (homing function enable) for homing.
When Pr. 00-10 is set to 3, after homing is complete, you must set the control mode (Pr. 00-10=1)
to execute P2P position control.
Display Filter Time (Current)
Settings
Minimizes the current fluctuation displayed by digital keypad.
Display Filter Time (Keypad)
Settings
Minimizes the value fluctuation displayed by digital keypad.
Software Version (date)
Settings
Displays the current drive software version by date.
0.0–1500.0 Hz
0.0–1500.0 Hz
0.001–65.535 sec.
0.001–65.535 sec.
Read only
12.1-00-20
Default: 8.0
Default: 2.0
Default: 0.100
Default: 0.100
Default: Read only