Delta VFD300C43S-HS User Manual page 434

Chapter 12 Description of Parameter SettingsC2000-HS
CANopen Decoding Method
Settings
CANopen Communication Status
Settings
CANopen Control Status
Settings
CANopen Master Function
Settings
CANopen Master Address
Settings
Communication Card Identification
Settings
0: Disable (Delta-defined decoding method)
1: Enable (CANopen DS402 Standard protocol)
0: Node Reset State
1: Com Reset State
2: Boot up State
3: Pre-operation State
4: Operation State
5: Stop State
0: Not ready for use state
1: Inhibit start state
2: Ready to switch on state
3: Switched on state
4: Enable operation state
7: Quick stop active state
13: Error reaction activation state
14: Error state
0: Disable
1: Enable
0–127
0: No communication card
1: DeviceNet Slave
2: Profibus-DP Slave
3: CANopen Slave / Master
4: MODBUS-TCP Slave
5: EtherNet / IP Slave
6: EtherCAT
12: PROFINET
12.1-09-15
Default: 1
Default: Read only
Default: Read Only
Default: 0
Default: 100
Default: Read only