Delta VFD300C43S-HS User Manual page 469

 Analog Output 1 Gain (AO10)
 Analog Output 1 Gain (AO11)
Settings

Adjusts the voltage level outputted to the analog meter from the analog signal (Pr.14-12,
Pr.14-13) output terminal AFM of the drive.
 Analog Output 1 in REV Direction (AO10)
 Analog Output 1 in REV Direction (AO11)
Settings

Determines the voltage reverse output when AO10 and AO11 are set as 0–10 V (Pr.14-36 = 2,
Pr.14-37 = 2).
 Extension Card Input Selection (AI10)
Settings
 Extension Card Input Selection (AI11)
Settings

When you change the input mode, verify that the switch position of external terminal (AI10, AI11)
is correct.
AO10 DC Output Setting Level

 AO11 DC Output Setting Level
Settings
0.0–500.0%
0: Absolute output voltage value
1: Reverse output 0V; forward output 0–10V
2: Reverse output 5–0V; forward output 5–10V
0: 0–10V (AVI10)
1: 0–20mA (ACI10)
2: 4–20mA (ACI10)
0: 0–10V (AVI11)
1: 0–20mA (ACI11)
2: 4–20mA (ACI11)
0.00–100.00%
12.1-14-3
Chapter 12 Description of Parameter SettingsC2000-HS
Default: 100.0
Default: 0
Default: 0
Default: 0
Default: 0.00