Delta VFD300C43S-HS User Manual page 230

Chapter 11 Summary of Parameter SettingsC2000-HS
Pr. Parameter Name
02-18 Multi-function output direction

Terminal counting value reached
02-19

(returns to 0)
Preliminary counting value reached
02-20

(does not return to 0)
02-21 Digital output gain (DFM)

02-22 Desired frequency reached 1

The width of the desired frequency
02-23

reached 1
02-24 Desired frequency reached 2

The width of the desired frequency
02-25

reached 2
02-32 Brake delay time
Output current level setting for
02-33

multi-function output terminal
Output frequency setting for
02-34

multi-function output terminal
Setting Range
36: Error output selection 2 (Pr. 06-24)
37: Error output selection 3 (Pr. 06-25)
38: Error output selection 4 (Pr. 06-26)
39: Position reached (Pr. 10-19)
40: Speed reached (including stop)
41: Multi-position reached
42: Crane function
43: Actual motor speed higher than Pr. 02-47
44: Low current output (use with Pr. 06-71–06-73)
45: UVW output electromagnetic valve switch
46: Master dEb output
47: Closed brake output
49: Homing action complete output
50: Output control for CANopen
51: Analog output control for RS-485 interface
(InnerCOM / MODBUS)
52: Output control for communication cards
65: Output for both CANopen & RS-485 control
66: SO output logic A
67: Analog input level reached
68: SO output logic B
70: FAN warning detection output
0000h–FFFFh (0: N.O.; 1: N.C.)
0–65500
0–65500
1–166
0.0–1500.0 Hz
0.0–1500.0 Hz
0.0–1500.0 Hz
0.0–1500.0 Hz
0.000–65.000 sec.
0–100%
0.0–1500.0 Hz
(Motor speed when using PG Card)
11-14
Default
0000h
0
0
1
600.0
2.0
600.0
2.0
0.000
0
3.0