Delta VFD300C43S-HS User Manual page 305

Settings Functions
Signal confirmation for
29
Y-connection
Signal confirmation for
30
-connection
31 High torque bias
32 Middle torque bias
33 Low torque bias
Switch between
34 multi-step position and
multi-step speed control
Enable single-point
35
position control
Chapter 12 Description of Parameter SettingsC2000-HS
When the control mode is V/F, ON: the drive operates by the first
V/F.
When the control mode is V/F, ON: the drive operates by the
second V/F.
Refer to Pr. 11-30–Pr. 11-32 for details.
ON: the corresponding 15-step speed for the multi-function
inputs 1 4 are 15 positions. Refer to Pr.04-16
–
ON: the AC motor drive executes internal single-point position
control according to the setting for Pr.10-19. This function is valid
in FOCPG mode only.
12.1-02-7
Descriptions
Pr.04-44.
–