Delta VFD300C43S-HS User Manual page 552

Chapter 13 Warning CodesC2000-HS
ID No. Display on LCM Keypad
93
Action level
Action time
Warning setting parameter
Reset method
Reset condition
Record
Cause
Non-C2000-HS PLC program is
copied to C2000-HS
ID No. Display on LCM Keypad
94
Action level
Action time
Warning setting parameter
Reset method
Reset condition
Record
Cause
The PLC copied to C2000-HS
exceeds the allowable capacity
ID No. Display on LCM Keypad
95
Action level
Action time
Warning setting parameter
Reset method
Reset condition
Record
Cause
PLC function is enabled when
KPC-CC01 is running copy PLC
Warning Name
Copy PLC version error.
Copy PLC: version
When non-C2000-HS built-in PLC is copied to
error (CPLv)
C2000-HS drive, the CPLv warning shows
Action and Reset
Software detection
Immediately acts
N/A
Manual reset
Directly resets
N/A
Check if the copied PLC program is for C2000-HS.
Use the correct C2000-HS PLC program.
Warning Name
Copy PLC: size error
Copy PLC Capacity size error
(CPLS)
Action and Reset
Software detection
Immediately acts
N/A
Manual reset
Directly resets
N/A
Check if the copied PLC program is for C2000-HS
Use C2000-HS PLC program with correct capacity
Warning Name
Copy PLC: PLC KPC-CC01 Copy PLC function should be executed
function (CPLF) when PLC is off
Action and Reset
Software detection
Immediately acts
N/A
Manual reset
Directly resets
N/A
Disable PLC function first, then run the PLC copy function again
13-40
Description
Corrective Actions
Description
Corrective Actions
Description
Corrective Actions