Table of Contents
Advertisement
The Graphical User Interface
Agilent 81950A Compact TLS module, First Edition
How to Set the Wavelength or Frequency
Note: This applies to "Auto Mode" only. For more information, refer to the
chapters "Operation Modes" on page 34 and "How to Switch Operation
Mode" on page 40.
• Move to parameter wavelength
• If you want to switch from wavelength to frequency or back press the
[Freq/Wvl] soft key.
• Change the value as described in chapter "How to Set a Parameter 37"
on page 31.
Operating Instructions
λ [ ]
f [ ]
or frequency
.
43
Advertisement
Table of Contents
