To Set Up The 4349B; To Reset The 4349B; To Set The Line Frequency; To Perform The Open Correction - Agilent Technologies 4349B Manual

4349B

To Set Up the 4349B

To Reset the 4349B

The following commands reset the 4349B:
Note
initiates the trigger system also.
For example,

To Set the LINE Frequency

The following command sets the LINE frequency:
For example, to set the LINE frequency to 50 Hz,

To Perform the OPEN Correction

The following commands perform the OPEN correction:
For example,

To Select the Measurement Parameter

The following command selects the measurement parameters:
To select the resistance mode,
To select the current mode,
Remote Operation 4-5