Concluding Steps - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Ê To eject the microSD card, gently push it in and then let go (1).
Ê Pull the microSD card straight out of its slot (2).
Ê Install both microSD cards on the new Dual microSD 64GB Enterprise.
Proceed as described in the following:
Figure 402: Installing the microSD card
Ê With the label facing up, insert the microSD card into the microSD slot on
the controller (1) until it locks in place (2).
Ê Install the new Dual microSD 64GB Enterprise, see section
Dual microSD 64GB Enterprise" on page

16.6.3.3 Concluding steps

Ê If applicable "Installing the air duct" on page 89
"Reassembling" on page 63
Ê
"Connecting the power cord" on page 67
Ê
"Switching on the server" on page 70
Ê
16.6.4 Replacing the microSD card
Upgrade and Repair Unit
(URU)
Tools: a pair of side-cutting pliers
16.6.4.1 Preliminary steps
"Locating the defective server" on page 53
Ê
RX2540 M4
Upgrade and Maintenance Manual
System board and components
524.
Hardware: 5 minutes
"Installing the
533