Front Vga Board (3.5-Inch Version) - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Front panel
"Reassembling" on page 63
Ê
"Connecting the power cord" on page 67
Ê
"Switching on the server" on page 70
Ê
"Verifying system information backup/restore" on page 99
Ê
Ê Store your server's system information on the Chassis ID EPROM
integrated into the front panel board. For more information on how to obtain
and use the ChassisId_Prom Tool, see section
Tool" on page
"Resuming BitLocker functionality" on page 112
Ê
14.7

Front VGA board (3.5-inch version)

14.7.1 Installing the front VGA connector
Upgrade and Repair Unit
(URU)
Tools: flat screw driver
Phillips PH1 screw driver
14.7.1.1 Preliminary steps
"Suspending BitLocker functionality" on page 91
Ê
"Locating the defective server" on page 53
Ê
"Shutting down the server" on page 55
Ê
"Disconnecting the power cord" on page 56
Ê
"Getting access to the component" on page 58
Ê
"Removing the fan holder" on page 233
Ê
14.7.1.2 Removing the front panel module
Ê Remove the front panel module, see section
module" on page
474
118.
469.
Upgrade and Maintenance Manual
"Using the Chassis ID Prom
Hardware: 10 minutes
"Removing the front panel
RX2540 M4