System Board - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

16.7

System board

16.7.1 Replacing the system board
Field Replaceable Unit
(FRU)
Tools: Replacing the system board:
– Phillips PH2 / (+) No. 2 screw driver
– hexagon screw driver 5 mm (for OCP bolts)
– Magnifying glass for inspecting CPU socket springs
(recommended)
Replacing the TPM:
– Bit screw driver
– flat nose pliers
– TPM bit insert
– thin slotted screw driver (2 x 0.4 mm)
( )
* For Japan:
– Dedicated TPM screw driver (CWZ8291A)
– TPM module fixing tool (S26361-F3552-L909)
If an OCP module is installed:
– Phillips PH1 / (+) No. 1 screw driver
Note on TPM
I
The system board can be equipped with an optional TPM (Trusted
Platform Module). This module enables third party programs to store key
information (e. g. drive encryption using Windows Bitlocker Drive
Encryption).
If the customer is using TPM functionality, the TPM has to be removed
from the defective system board and connected to the new system
board. For a detailed description, see section
page 511.
The TPM is activated in the system BIOS.
RX2540 M4
( )
*
Upgrade and Maintenance Manual
System board and components
Hardware: 50 minutes
Software: 10 minutes
( )
*
"Replacing the TPM" on
535