Replacing The Front Vga Board - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

14.7.3 Replacing the front VGA board

Upgrade and Repair Unit
(URU)
Tools: Phillips PH1 screw driver
14.7.3.1 Preliminary steps
"Suspending BitLocker functionality" on page 91
Ê
"Locating the defective server" on page 53
Ê
"Shutting down the server" on page 55
Ê
"Disconnecting the power cord" on page 56
Ê
"Getting access to the component" on page 58
Ê
"Removing the fan holder" on page 233
Ê
14.7.3.2 Removing the front panel module
Ê Remove the front panel module, see section
module" on page
14.7.3.3 Removing the front VGA board
Ê Remove the front VGA board, see section
on page 477.
14.7.3.4 Installing the new front VGA board
Ê Install the new front VGA board, see section
on page 476.
14.7.3.5 Installing the front panel module
Ê Install the front panel module, see section
on page 471.
RX2540 M4
469.
Upgrade and Maintenance Manual
Hardware: 15 minutes
"Removing the front panel
"Removing the front VGA board"
"Installing the front VGA board"
"Installing the front panel module"
Front panel
479