9.4.2.3
Installing the dummy cover
Figure 163: Installing the dummy cover
Ê Insert the dummy cover. Notice the position of the handle.
9.4.2.4
Concluding steps
Ê If applicable, install the riser module 1, see section
on page
71.
"Reassembling" on page 63
Ê
"Connecting the power cord" on page 67
Ê
"Switching on the server" on page 70
Ê
9.4.3
Replacing the OCP module
Upgrade and Repair Unit
(URU)
Tool:
Phillips PH1 / (+) No. 1 screw driver
I
WWN and MAC addresses will not be changed by replacing an OCP
module.
RX2540 M4
Upgrade and Maintenance Manual
Expansion cards and backup units
"Handling riser modules"
Hardware: 10 minutes
251