Removing A Gpgpu Card (Fl) - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Expansion cards and backup units

9.10.2.5 Removing a GPGPU card (FL)

Figure 197: Removing a GPGPU card from a riser module
Ê Remove two screws (see circles).
Ê Carefully remove the GPGPU card from its slot.
9.10.2.6 Installing the slot cover for the riser module 1
Ê Install the slot cover for the riser module 1, see section
cover for the riser module 1" on page
9.10.2.7 Installing the rear air grid riser module 1
Ê Install the rear air grid riser module 1, see section
riser module 1" on page
9.10.2.8 Installing the air duct
I
If no GPGPU card is installed you have to order a new air duct to direct
the airflow directly onto the CPU heat sinks and memory slots.
Ê Install the new air duct, see section
298
273.
Upgrade and Maintenance Manual
270.
"Installing the rear air grid
"Installing the air duct" on page
"Installing the slot
89.
RX2540 M4