Concluding Steps - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Power supply unit (PSU)
Figure 25: Connecting the power cables
Ê Connect the two power cables to the system board connectors "PC98" and
"PWR1".
For the cable plan see section
6.2.1.4

Concluding steps

"Reassembling" on page 60
Ê
"Connecting the power cord" on page 64
Ê
"Switching on the server" on page 66
Ê
"Resuming BitLocker functionality" on page 95
Ê
"Performing a fan test" on page 101
Ê
V
CAUTION!
(Except for Japan) After replacing the PSU a fan calibration must be
started for the PSU fan. You will find the description for this procedure in
the manual "ServerStart".
108
"Cabling plans" on page
Upgrade and Maintenance Manual
312.
RX1330 M3