Concluding Steps - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

System board and components
1 FBU 1
2 FBU 2 or Dual microSD 64GB Enterprise
Ê Remove the riser module 2, see section
on page 85.
Ê Connect the cables to the system board, see section
to the system board" on page
Ê Install the riser module 2, see section
page 86.
Figure 396: Installing the Dual microSD 64GB Enterprise onto the riser card holder
Ê Place the holder on the shoulder screw caps of the riser card holder (1).
Ê Push the holder in direction of the arrow until it engages (2).
Ê Install the air duct, see section

16.6.1.3 Concluding steps

"Reassembling" on page 63
Ê
"Connecting the power cord" on page 67
Ê
528
526.
"Installing the air duct" on page
Upgrade and Maintenance Manual
"Removing the riser module 2 (FL)"
"Connecting the cables
"Installing the riser module 2 (FL)" on
89.
RX2540 M4