Concluding Steps - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

System board and components
Figure 379: Removing the TPM spacer
Ê Using a pair of flat nose pliers, press together the hooks on the TPM spacer
(see arrows) and remove it from the system board.
I
If the TPM is to be replaced, the TPM spacer may remain on the
system board.
Ê If applicable, install the OCP module, see section
module" on page
Ê Install the system board, see section
page 540.

16.3.2.3 Concluding steps

Ê If applicable, install the riser module 1, see section
on page 71.
"Installing the fan holder" on page 234
Ê
"Installing the air duct" on page 89
Ê
"Reassembling" on page 63
Ê
"Connecting the power cord" on page 67
Ê
"Switching on the server" on page 70
Ê
"Resuming BitLocker functionality" on page 112
Ê
510
249.
Upgrade and Maintenance Manual
"Installing the OCP
"Installing the new system board" on
"Handling riser modules"
RX2540 M4