Installing The Fbu - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

9.10.3.8 Installing the FBU

Ê Install the second FBU, see section
holder (FL)" on page
9.10.3.9 Installing the air duct riser module 2
Figure 199: Preparing the air duct for riser module 1
Ê Break out the blind cover on the right side from the air duct using a side
cutter (see circles).
Ê Install the air duct, see section
RX2540 M4
317.
"Installing the air duct" on page
Upgrade and Maintenance Manual
Expansion cards and backup units
"Installing an FBU on the riser card
89.
301