4.5
Reassembling
V
CAUTION!
Before attaching the covers, ensure that no unnecessary parts or
●
tools are left inside the server.
In order to comply with applicable EMC regulations (regulations on
●
electromagnetic compatibility) and satisfy cooling requirements, the
server must not run while the top cover is removed.
For more information, see chapter
●
page
41.
4.5.1
Installing the top cover
Figure 8: Installing the top cover
Ê Open the locking lever on the top cover.
Ê Fit the top cover on the chassis, aligning it according to the edge guide
marking on the upper server surface.
Ê Lower the top cover onto the chassis (1).
Ê Close the locking lever on the top cover. This will slide the top cover shut
engaging the locking mechanism (2).
RX2540 M4
Upgrade and Maintenance Manual
Basic hardware procedures
"Important information" on
63