Concluding Steps - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Main memory
Figure 226: Removing memory modules (B)
Ê Remove the ejected memory module.

10.3.3 Concluding steps

Ê If applicable, install the riser module, see section
cards (FL)" on page
"Reassembling" on page 63
Ê
"Connecting the power cord" on page 67
Ê
"Switching on the server" on page 70
Ê
"Resuming BitLocker functionality" on page 112
Ê
10.4 Replacing a memory module
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver (for the riser module)
10.4.1 Preliminary steps
"Locating the defective server" on page 53
Ê
"Suspending BitLocker functionality" on page 91
Ê
"Shutting down the server" on page
Ê
"Disconnecting the power cord" on page 56
Ê
"Getting access to the component" on page 58
Ê
342
82.
Upgrade and Maintenance Manual
"Riser modules for GPGPU
Hardware: 5 minutes
Software: 5 minutes
55.
RX2540 M4