Concluding Steps - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Front panel

14.7.3.6 Concluding steps

"Installing the fan holder" on page 234
Ê
"Reassembling" on page 63
Ê
"Connecting the power cord" on page 67
Ê
"Switching on the server" on page 70
Ê
"Resuming BitLocker functionality" on page 112
Ê
14.8 Front USB3.0 connector (3.5-inch version)
I
The maximum external cable length is limited to 3 m.
14.8.1 Installing the front USB3.0 connector
Upgrade and Repair Unit
(URU)
Tools: Phillips PZ2 screw driver / hexagon screw driver 5 mm
14.8.1.1 Preliminary steps
"Suspending BitLocker functionality" on page 91
Ê
"Locating the defective server" on page 53
Ê
"Shutting down the server" on page 55
Ê
"Disconnecting the power cord" on page 56
Ê
"Getting access to the component" on page 58
Ê
"Removing the fan holder" on page 233
Ê
14.8.1.2 Removing the front panel module
Ê Remove the front panel module, see section
module" on page
480
469.
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Removing the front panel
RX2540 M4