Installing The Rear Backplane - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD) and solid state drives (SSD)
Figure 133: Rear HDD cage - 2 screws on the side
Ê Fasten the rear HDD cage with 2 screws on the side (see circles).
7.5.2.4

Installing the rear backplane

Ê If applicable, install the rear backplane, see section
backplane" on page
7.5.2.5 Installing the controller
Ê If applicable, install the controller, see section
on page 253.
7.5.2.6 Connecting cables to the rear extension box
I
For the cable plan, see chapter
I
The cabling of the backplane depends on the backplane and the
controller installed.
Connecting the cables to the rear backplane
Ê Connect the cables to the rear backplane, see section
to the rear backplane" on page
220
213.
"Appendix B" on page
214.
Upgrade and Maintenance Manual
"Installing the rear
"Installing an expansion card"
573.
"Connecting cables
RX2540 M4