Replacing The Tpm - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

16.3.3 Replacing the TPM

Field Replaceable Unit
(FRU)
Tools: Removing the system board:
– Phillips PH2 / (+) No. 2 screw driver/ hexagon screw driver 5 mm
Replacing the TPM:
– Bit screw driver
– TPM bit insert
– flat nose pliers
– thin slotted screw driver (2 x 0.4 mm)
( )
* For Japan:
– Dedicated TPM screw driver (CWZ8291A)
– TPM module fixing tool (S26361-F3552-L909)
V
CAUTION!
Advise your contact persons that they must provide you with all recovery
keys which belong to the system to restore them in the TPM later.
16.3.3.1 Preliminary steps
"Locating the defective server" on page 53
Ê
"Suspending BitLocker functionality" on page 91
Ê
"Shutting down the server" on page 55
Ê
"Disconnecting the power cord" on page 56
Ê
"Getting access to the component" on page 58
Ê
"Removing the air duct" on page 88
Ê
"Removing the fan holder" on page 233
Ê
Ê If applicable, remove the riser module 1, see section
modules" on page
RX2540 M4
( )
*
71.
Upgrade and Maintenance Manual
System board and components
Hardware: 40 minutes
( )
*
"Handling riser
511