Removing The Front Usb3.0 Connector - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Front panel

14.8.2.3 Removing the front USB3.0 connector

Figure 361: Removing the front USB3.0 connector
Ê Remove the two screws (see circles).
Ê Disconnect the front USB3.0 connector.
14.8.2.4 Installing the front panel module
Ê Install the front panel module, see section
on page 471.
14.8.2.5 Concluding steps
"Installing the fan holder" on page 234
Ê
"Reassembling" on page 63
Ê
"Connecting the power cord" on page 67
Ê
"Switching on the server" on page 70
Ê
"Resuming BitLocker functionality" on page 112
Ê
484 Upgrade and Maintenance Manual
"Installing the front panel module"
RX2540 M4