Removing The Dummy Cover; Installing A Hot-Plug Psu - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Power supply unit (PSU)
6.2.1.2

Removing the dummy cover

Figure 38: Removing the dummy cover
Ê Press in on both release latches (1) and remove the PSU dummy cover (2).
V
CAUTION!
Keep the dummy cover for future use. If a PSU is removed and not
immediately replaced by a new one, a dummy cover must be installed in
the bay again to comply with applicable EMC regulations and satisfy
cooling requirements.
6.2.1.3

Installing a hot-plug PSU

Figure 39: Folding up the handle
Ê Push the handle of the PSU halfway upward in the direction of the arrow.
128 Upgrade and Maintenance Manual
RX2540 M4