Power supply unit (PSU)
Figure 27: Connecting the power cables
Ê Connect the power cables to the system board:
1
PSU power cable to connector "PWR MAIN".
2
Power signal cable to connector "PC98".
Figure 28: Power cable routing
Ê Run the power signal cable between the two retainers (see arrows).
6.2.1.4
Concluding steps
"Reassembling" on page 57
Ê
"Connecting the power cord" on page 60
Ê
"Switching on the server" on page 63
Ê
104
Upgrade and Maintenance Manual
TX1320 M4