Preliminary Steps - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

14.3.1.1 Preliminary steps

"Suspending BitLocker functionality" on page 91
Ê
"Locating the defective server" on page 53
Ê
"Shutting down the server" on page 55
Ê
"Disconnecting the power cord" on page 56
Ê
"Getting access to the component" on page 58
Ê
"Removing the fan holder" on page 233
Ê
14.3.1.2 Removing the front panel module
Ê Remove the front panel module, see section
module" on page
14.3.1.3 Preparing the front panel module
Figure 330: Removing the front VGA cover plate
Ê Insert a flat screw driver to disengage VGA cover plate from the front panel
cover (1).
Ê Pull the VGA cover plate out of the front panel module.
RX2540 M4
438.
Upgrade and Maintenance Manual
"Replacing the front panel
Front panel
449