Installing An Expansion Card In Riser Module 2; Preliminary Steps; Installing An Expansion Card In A Riser Module 2; Installing The Air Grid Extension To The Riser Module 2 - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Expansion cards and backup units
"Reassembling" on page 63
Ê
"Connecting the power cord" on page 67
Ê
"Switching on the server" on page 70
Ê
"Resuming BitLocker functionality" on page 112
Ê
9.9.3

Installing an expansion card in riser module 2

Upgrade and Repair Unit
(URU)
Tools: Phillips PZ2 / (+) No. 2 screw driver / hexagon screw driver 5 mm
9.9.3.1

Preliminary steps

"Suspending BitLocker functionality" on page 91
Ê
"Shutting down the server" on page 55
Ê
"Disconnecting the power cord" on page 56
Ê
"Getting access to the component" on page 58
Ê
Ê If applicable, "Installing the riser card" on page 73
9.9.3.2

Installing an expansion card in a riser module 2

Ê Install the expansion card, see section
riser module" on page
9.9.3.3

Installing the air grid extension to the riser module 2

Ê Install the air grid extension to the riser module 2, see section
air grid extension to riser module 2" on page
9.9.3.4

Remove the slot cover for the riser module 2

Ê Remove the slot cover for the riser module 2, see section
cover for the riser module 2" on page
284
281.
Upgrade and Maintenance Manual
Hardware: 5 minutes
Software: 5 minutes
"Installing an expansion card in a
275.
272.
"Installing the
"Removing the slot
RX2540 M4