Removing The Rear Air Grid (Left Hand) - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

7.5.2.2

Removing the rear air grid (left hand)

Figure 130: Removing the rear air grid
Ê Remove three screws (see circles).
Ê Remove the rear air grid.
V
CAUTION!
Keep the rear air grid for future use.
Always replace rear air grids into unused installation locations to
comply with applicable EMC regulations and satisfy cooling
requirements.
RX2540 M4
Hard disk drives (HDD) and solid state drives (SSD)
Upgrade and Maintenance Manual 217