Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual page 557

iRMC-related status signals
ID indicator
blue flashing
blue flashing
I
For further information, see section
and iRMC S5" on page
HDD/SSD prefailure detection
Depending on your hardware configuration HDD/SSD prefailure detection will
be supported.
The requirements are:
– iRMC S5 Firmware 1.2 or later
– supported OOB RAID system
RX2540 M4
Global error
indicator
off
orange flashing
96.
Upgrade and Maintenance Manual
Description
A remote connection has been
established. Local VGA output has
been disabled during the remote
session.
An emergency flash of the iRMC
firmware is in progress.
"Updating or recovering the BIOS
Appendix A
557