Preliminary Steps - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Liquid cooling (LC)

12.4.3.1 Preliminary steps

"Locating the defective server" on page 53
Ê
"Suspending BitLocker functionality" on page 91
Ê
"Shutting down the server" on page 55
Ê
"Disconnecting the power cord" on page 56
Ê
"Getting access to the component" on page 58
Ê
Ê If applicable, remove the riser module, see section
GPGPU cards (FL)" on page
12.4.3.2 Replacing a memory module
Ê Prepare the memory modules, see section
on page 384.
Ê Remove the memory modules, see section
on page 387.
Ê Install the memory modules, see section
page 385.
12.4.3.3 Concluding steps
Ê If applicable, install the riser module, see section
cards (FL)" on page
"Reassembling" on page 63
Ê
"Connecting the power cord" on page 67
Ê
"Switching on the server" on page 70
Ê
"Resetting the error status after replacing memory modules or CPUs" on
Ê
page 104
"Enabling replaced components in the BIOS" on page 108
Ê
"Verifying the memory mode" on page 108
Ê
"Resuming BitLocker functionality" on page 112
Ê
388
82.
82.
Upgrade and Maintenance Manual
"Riser modules for
"Preparing the memory modules"
"Removing a memory module"
"Installing a memory module" on
"Riser modules for GPGPU
RX2540 M4