Concluding Steps - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Cabling with RAID controller
Figure 72: Connecting the second 3.5-inch HDD backplane to the RAID controller
Ê Connect the SAS cable of the second HDD backplane to the connector
"MLC2" on the RAID controller (1).
I
For the cable plan, see chapter
7.3.9.4

Concluding steps

"Installing the fan holder" on page 234
Ê
Ê Install all removed HDD modules, see section
modules" on page
I
For detailed information on HDD mounting order, see section
inch HDD configurations" on page
"Reassembling" on page 63
Ê
"Connecting the power cord" on page 67
Ê
"Switching on the server" on page 70
Ê
"Resuming BitLocker functionality" on page 112
Ê
RX2540 M4
Hard disk drives (HDD) and solid state drives (SSD)
"Appendix B" on page
148.
Upgrade and Maintenance Manual
MLC 2
573.
"Installing 3.5-inch HDD
145.
"3.5-
163