Important Information; Safety Instructions - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

3

Important information

I
Depending on your server or the installed options some information is not
valid for your server.
V
CAUTION!
Before installing and starting up a server, please observe the safety
instructions listed in the following section. This will help you to avoid
making serious errors that could impair your health, damage the server
and endanger the data base.
3.1

Safety instructions

I
The following safety instructions are also provided in the manual "Safety
Notes and Regulations" or " 安全上のご注意 ".
This server meets the relevant safety regulations for IT equipment. If you have
any questions about whether you can install the server in the intended
environment, please contact your sales outlet or our customer service team.
The actions described in this manual shall be performed by technical
●
specialists. A technical specialist is a person who is trained to install the
server including hardware and software.
Repairs to the server that do not relate to CSS failures shall be performed
●
by service personnel. Please note that unauthorized interference with the
server will void the warranty and exempt the manufacturer from all liability.
Any failure to observe the guidelines in this manual, and any improper
●
repairs could expose the user to risks (electric shock, energy hazards, fire
hazards) or damage the equipment.
Only valid for non hot-plug components
●
Before installing/removing internal components to/from the server, turn off
the server, all peripheral devices, and any other connected devices. Also
unplug all power cords from the power outlet. Failure to do so can cause
electric shock or damage.
Before starting up
During installation and before operating the server, observe the instructions
●
on environmental conditions for your server.
RX2540 M4
Upgrade and Maintenance Manual 41