Concluding Steps - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

System board and components
Figure 381: Installing the iRMC microSD card
Ê With the label facing up, insert the iRMC microSD card into the microSD
card slot (1) until it locks in place (2).
I
The onboard position of the microSD card slot can be found in section
"Connectors and indicators on the system board" on page

16.4.1.3 Concluding steps

Ê If applicable, install the riser module 1, see section
on page 71.
"Reassembling" on page 63
Ê
"Connecting the power cord" on page 67
Ê
"Switching on the server" on page 70
Ê
16.4.2 Removing the iRMC microSD card
Upgrade and Repair Unit
(URU)
Tools: tool-less
16.4.2.1 Preliminary steps
"Shutting down the server" on page 55
Ê
"Disconnecting the power cord" on page 56
Ê
"Getting access to the component" on page 58
Ê
514 Upgrade and Maintenance Manual
"Handling riser modules"
Hardware: 5 minutes
549.
RX2540 M4